The FIS115 parts are Current sense transformers provide output feedback to the pulse control circuitry allowing low-cost regulation of switch-mode power supplies, manufactured by PULSE are available for purchase at 9icnet Electronics. Here you can find various types and values of electronic parts from the world's leading manufacturers. The FIS115 components of 9icnet Electronics are carefully chosen, undergo stringent quality control, and are successfully meet all required standards.
The production status marked on 9icnet.com is for reference only. If you didn't find what you were looking for, you can get more valuable information by emails, such as the FIS115 Inventory quantity, preferential price, datasheet, and manufacturer. We are always happy to hear from you, so feel free to contact us.
The FIS111NL is XFRMR CURR SENSE 15A 1:100 T/H, that includes FIS Series, they are designed to operate with a Power Inductors Product, Type is shown on datasheet note for use in a Current Sense Inductor, that offers Packaging features such as Tube, Current Rating is designed to work in 15A, as well as the PC Pin Termination Style, the device can also be used as 20.4 mm Height. In addition, the Length is 17.2 mm, the device is offered in 9.53 mm Width, the device has a 17.2 mm x 9.53 mm x 20.4 mm of Package Case, and Frequency is 200kHz Max, and the Mounting Type is Through Hole, and Size Dimension is 17.20mm L x 9.53mm W, and the Lead Spacing is 12.7 mm, and Height Seated Max is 20.40mm, and the Test Frequency is 10 kHz, and Turns Ratio Primary:Secondary is 0.111111111111111, and the Inductance is 22mH, and DC Resistance DCR is 1.3 Ohm Max, and the E T is 350V μS, and Maximum DC Current is 15 A, and the Maximum DC Resistance is 1.3 Ohms.
The FIS1100 is IC MEMS INTERTIAL MEASURE 16LGA, that includes 2.4 VDC Supply Voltage Min, they are designed to operate with a 3 VDC Supply Voltage Max, Sensor Type is shown on datasheet note for use in a Accelerometer, Gyroscope, 3 Axis, that offers Sensitivity features such as 1024 LSB/dps, Sensing Axis is designed to work in X Y Z, as well as the 16 bit Resolution, the device can also be used as 32 deg/s to 2560 deg/s Range. In addition, the Packaging is Reel, the device is offered in LGA-16 Package Case, the device has a I2C of Output Type, it has an Operating Temperature range of -40°C ~ 85°C (TA), and the Operating Supply Current is 2.75 mA, it has an Minimum Operating Temperature range of - 40 C, it has an Maximum Operating Temperature range of + 85 C, and Interface Type is I2C SPI, and the Features is Temperature Sensor, and Acceleration is 2 g 4 g 8 g.
The FI-S10P-HFE-E1500 is CONN RCPT 1.25MM 10POS SMD R/A, that includes Beige Color, they are designed to operate with a Receptacle Connector Type, Contact Finish is shown on datasheet note for use in a Gold, that offers Contact Type features such as Male Pin, Fastening Type is designed to work in Friction Lock, as well as the Solder Retention Features, the device can also be used as Surface Mount, Right Angle Mounting Type. In addition, the Number of Positions is 10, the device is offered in All Number of Positions Loaded, the device has a 1 of Number of Rows, and Packaging is Digi-ReelR Alternate Packaging, and the Pitch is 0.049" (1.25mm), and Product is Board Mount, and the Series is FI, and Termination is Solder.
The FI-S10S is CONN PLUG 1.25MM 10POS CBL MNT, that includes SMD Termination Style, they are designed to operate with a Plug Connector Type, Fastening Type is shown on datasheet note for use in a Friction Lock, that offers Mounting Type features such as Free Hanging (In-Line), Product is designed to work in Free Hanging, as well as the FI Series, the device can also be used as Female Socket Contact Type. In addition, the Contact Termination is Crimp, the device is offered in Bulk Packaging, the device has a Black of Color, and Number of Positions is 10, and the Current Rating is 1 A, and Number of Rows is 1, and the Pitch is 0.049" (1.25mm).