M series PRTDs are designed for large volume applications where long term stability, interchangeability and accuracy over a large temperature range are vital. Typical applications are Automotive, White goods, HVAC, Energy management, Medical and Industrial equipment.
Nominal Resistance R0 Tolerance DIN 60751 1996-07 Clas 1/3 B Class A Class B Class 2B Class B Class A Tolerance DIN F 0.15 Order Number Plastic Bag Order Number Blister Reel
Clas B F Class A F Class B F Class 2B F The measuring point for the nominal resistance is defined at 8mm from the end of the sensor body (4mm from the end of the sensor body for part numbers 32208573 and 32208557). 1000 Ohm at 0�C
DIN EN 60751 (according to IEC to +500�C (continuous operation) (temporary use to 550�C possible) Tolerance Class to +500�C Tolerance Class to +500�C Tolerance Class to +300�C Tolerance Class to +150�C TCR = 3850 ppm/K Pt clad Ni- wire Recommend connection technology: Welding, Crimping and Brazing (6mm �1mm for p/n 32208573 and 32208557) max. R0-drift 0.04% after 500�C at least 40g acceleration to 2000 Hz, depends on installation at least 100g acceleration with 8ms half sine wave, depends on installation unhoused for dry environments only 500�C 0.4 K/mW at 0�C water current (v= 0.4m/s): air stream (v= = 10.0s
Lead lengths (L) Long-term stability Vibration resistanceEnvironmental conditions Insulation resistance Self heating Response time
to 0.3mA (self heating has to be considered) Other tolerances, values of resistance and wire lengths are available on request.
We reserve the right to make alterations and technical data printed. All technical data serves as a guideline and does not guarantee particular properties to any products.
1901 Route 130 North Brunswick, NJ 08902 Phone 732-940-4400 Fax 732-940-4445 Email info.hst-us@heraeus.com www.hst-us.com
